Instrumentation guides
Signal loops, screen and drain earthing, and keeping instrumentation cable clear of power.
- 5 min readWorked examples index by tool and tradeEvery AmpSize worked example in one place, grouped by calculator and tagged with the trade it was written for, from house circuits to industrial boards.

- 3 min readCurrent to kW 3 phase from plant meteringA plant meter reads 120 A at 0.82 power factor on 400 V. The tool returns the apparent power, the real power in kW and the reactive power in kvar.

- 3 min readBattery backup for a PLC panel at 24 V DCSizing a 24 V DC backup bank for an 80 W PLC panel over one day of autonomy, with the daily energy, the daily charge and the bank capacity the tool returns.

- 3 min read24 V DC voltage drop on an instrument loopA 4-20 mA loop runs 200 m on 2.5 mm² at 24 V. See the mV/A·m figure, the 7.51 percent drop and the maximum length the engine returns for a 10 percent limit.

- 5 min readDC cable size: 48 V battery and 600 V PV arrayTwo d.c. circuits sized to AS/NZS 3008.1.1:2025, a 48 V battery-to-inverter run that current sizes and a 600 V array feed that voltage drop sizes.

Calculators these guides use
- Cable size calculatorFind the smallest cable size that passes each check.
- Three phase power calculatorConvert between power, current, voltage and power factor.
- Battery bank calculatorCalculate battery bank capacity and autonomy for a load.
- Voltage drop calculatorCalculate voltage drop on a cable run and check the limit.
- DC cable size calculatorSize a d.c. cable up to 1500 V for current and voltage drop.