AS/NZS 3000:2018
Cl 3.6.2
Voltage drop limit from the point of supply, and how the parts of an installation add
The total voltage drop tool reads the 5 % limit from the point of supply, the 7 % from a dedicated substation on the premises, and names the 11 % of a stand-alone system.
تم التحقق: مقروء مقابل المعيار المطبوع، الصفحات 162–163, 480 (PDF = page + 4). تم التحقق في 1 Oct 2026.
الوحدات: Limit percent %
هذه هي القيم التي ترمّزها AmpSize. لا يُعاد إنتاج أي نص من المعيار. تحقق من المعيار الحالي.
3 صفوف
| Limit percent (%) | Clause | Page |
|---|---|---|
| 5 | 3.6.2 | 162 |
| 7 | 3.6.2 Exception 3 | 163 |
| 11 | 3.6.2 Exception 4 | 163 |
الأدوات التي تقرؤها (1)
الأدلة وصفحات التعلّم التي تستشهد به (24)
- Voltage drop single phase vs three phase
- Motor starting current for a 55 kW DOL start
- Hot water cylinder cable size for a 3 kW element
- How far can 1.5 mm² run on a 10 A circuit?
- How far can 4 mm² run on a 25 A circuit?
- Voltage drop on 2.5 mm² over 30 m
- Submain voltage drop estimate for a 160 A tender
- Submain cable size for 3‑phase 100 A over 60 m
- Total voltage drop: mains, submain and final
- Cable size for a 20 A heat pump circuit in summer
- AmpSize vs jCalc vs free cable sizing tools
- EV charger cable size for a 7 kW 32 A circuit
- AS/NZS 3008 vs BS 7671: cable sizing compared
- AWG and the NEC for NZ and AU electricians
- Voltage rise for a 5 kW solar inverter cable
- AS/NZS 3000 Clause 3.6.2: voltage drop limit
- Cable size for a 32 A single‑phase 25 m run
- Voltage drop with the mV/A·m method
- The 5 % voltage drop limit from supply to load
- Voltage drop basics
- Checking an existing circuit
- DC voltage drop and conductor resistance
- Motor circuits and starting
- PV and inverter basics