सामग्री पर जाएँ
AmpSize

वेट एरिया ज़ोन चेकर

पानी के पास Section 6 का ज़ोन, IP और RCD ज्ञात करें।

AS/NZS 3000समीक्षाधीन डेटा

Reads AS/NZS 3000:2018. Tables checked 1 Oct 2026.

इनपुट

डिफ़ॉल्ट इनपुट के साथ एक कार्य-उदाहरण।

स्थिति
बाथटब
देश
न्यूज़ीलैंड
फ़िक्सचर की लंबाई
1.6 m
फ़िक्सचर की चौड़ाई
0.7 m
कनेक्शन या रोज़ की ऊँचाई
0 m
साझा बाथ या शॉवर
नहीं
उपकरण
ल्यूमिनेयर
शावर कनेक्शन से दूरी
0 m
पानी में या आधार में (ज़ोन 0)
नहीं
बाहर की दूरी
0.8 m
फ़र्श से ऊँचाई
2.4 m
IP रेटिंग
IPX4
30 mA RCD पर
हाँ
प्रिंटिंग
A1 से A3 (वर्तमान)

ज़ोन

हर ज़ोन के बाहर

सबसे कम IP रेटिंग
कोई नहीं
यहां अनुमत
Outside the zones

यह परिणाम डिज़ाइन में सहायता के लिए है। इसे मौजूदा मानक से सत्यापित करें।

गणना के चरण

  1. स्थितिबाथ

    AS/NZS 3000:2018 Cl 6.2.2.1

  2. दूरी इससे मापी गईभीतरी रिम

    AS/NZS 3000:2018 Cl 6.2.2.1

  3. ज़ोन 10 m out, up to 2.25 m (Cl 6.2.2.1(b))

    AS/NZS 3000:2018 Cl 6.2.2.1

  4. ज़ोन 20.6 m out, up to 2.25 m (Cl 6.2.2.1(d))

    AS/NZS 3000:2018 Cl 6.2.2.1

  5. ज़ोन 33 m out, up to 2.25 m (Cl 6.2.2.1(e))

    AS/NZS 3000:2018 Cl 6.2.2.1

  6. डिवाइस की स्थिति0.8 m out, 2.4 m up

    AS/NZS 3000:2018 Cl 6.2.2.1

  7. ज़ोनपरिणामहर क्षेत्र के बाहर

    AS/NZS 3000:2018 Cl 6.2.2.1

इस कैलकुलेटर के बारे में

How this is calculated

The tool places a light, switch or socket‑outlet in a zone. It then reads the least IP rating and the RCD rule for that zone. It follows Section 6 of AS/NZS 3000:2018.

  1. Situation. You pick the fitting: a bath, a shower, a basin, a spa, a pool or a sauna. Each one has its own table of zones.
  2. Reference point. Each situation measures from its own point. A bath measures from the internal rim. A shower measures from the fixed plumbing connection or the rose.
  3. Zone limits. The tool lists Zone 1, Zone 2 and Zone 3 (Cl 6.2.2.1). Each has a distance out and a height up.
  4. Device position. You enter the horizontal distance and the height of the device. The tool finds the first zone that holds that point.
  5. IP rating. The zone sets the least IP rating (Cl 6.2.4). The tool compares your rating with it.
  6. RCD and position. The tool adds the RCD rule for a home (Cl 2.6.3.3.1). It also gives the lowest height for a socket‑outlet or switch.
StepTable or clauseWhat it decides
Zone limitsCl 6.2.2.1The distance and height of each zone
IP ratingCl 6.2.4The least IP rating for the zone
Walls and fixed barriersCl 6.2.1Where a zone stops
RCDCl 2.6.3.3.1The 30 mA rule for a home
BondingCl 5.6.2.5The earth bond of conductive reinforcing

Worked example

Each link opens the tool with its inputs.

  • Luminaire at an open shower. The luminaire sits 0.3 m from the plumbing connection and 1.8 m up. It has an IPX2 rating. The tool puts it in Zone 1 and asks for IPX4 at least. The check fails on the IP rating.

Limits

  • The tool does not model a barrier that shrinks a zone. Walls, doors, floors and ceilings also limit the zones. Check the room.
  • A shower over a bath adds a radius from the shower connection. You must type that distance.
  • Equipment behind a fixed IPX4 panel that needs a tool to open is not in a zone. The tool does not decide this for you.
  • A recessed fitting with all live parts above the ceiling is outside the zones below it.
  • Protection by obstacles or by placing out of reach is not allowed in these zones.
  • The tool points at the clause. It is not a ruling on a design.

See also: Wire a bathroom: zones, IP and the RCD, Damp situations and the Section 6 zones and RCD selection.

सवाल

परिणाम एक डिज़ाइन सहायता है। मौजूदा मानक से सत्यापित करें।

NZ और ऑस्ट्रेलिया में ज़ोन 1 कितनी ऊँचाई तक जाता है?

बाथ या शावर के ऊपर ज़ोन 1 न्यूज़ीलैंड में फ़र्श से 2.25 m ऊपर तक और ऑस्ट्रेलिया में 2.5 m तक चलता है। जहाँ शावर कनेक्शन ऊँचा हो, वह वहाँ तक जाता है। ज़ोन 2 दोनों देशों में 2.25 m पर खत्म होता है। ऑस्ट्रेलियाई ज़ोन 3 ज़ोन 2 के ऊपर की जगह भी लेता है, 2.5 m तक।

क्या बाथरूम में सॉकेट-आउटलेट लग सकता है?

ज़ोन 0 या ज़ोन 1 में नहीं। ज़ोन 2 में यह शेवर सप्लाई यूनिट होना चाहिए, या कैबिनेट के भीतर 30 mA RCD पर। ज़ोन 3 में इसे 30 mA RCD, सेपरेटेड सर्किट या SELV चाहिए। हर सॉकेट-आउटलेट और स्विच फ़र्श से 0.3 m या उससे ऊपर रखें।

शावर के ऊपर डाउनलाइट को किस IP रेटिंग की ज़रूरत है?

ज़ोन 1 या ज़ोन 2 में IPX4। सीलिंग रोज़ NZ में 1.2 m और ऑस्ट्रेलिया में 0.6 m का ज़ोन 1 देता है, रोज़ की ऊँचाई तक। एक रीसेस्ड लाइट जिसके सभी लाइव भाग छत के ऊपर हों, उसके नीचे के ज़ोन के बाहर रहती है।

क्या IPX7 उस ज़ोन को कवर करता है जिसे IPX5 चाहिए?

नहीं। 6 तक का दूसरा अंक हर निचले अंक को कवर करता है, लेकिन अकेला 7 या 8 कोई वॉटर जेट कवर नहीं करता (AS 60529 Cl 6)। पूल ज़ोन 1 को IPX5 चाहिए, इसलिए IPX5/IPX7 जैसा दोहरा कोड खोजें।

स्पा 680 L और 5000 L पर क्यों बदलता है?

680 L तक का स्पा बाथ और शावर ज़ोन लेता है। 680 L से 5000 L तक ज़ोन 1 किनारे से 1.25 m चलता है, 2.5 m तक। 5000 L से ऊपर, या पूल से जुड़ा होने पर, स्पा पूल ज़ोन लेता है।

फ़्लोर प्लान में

हल किए गए उदाहरण

बैकग्राउंड

वे Clauses और Tables जो यह टूल पढ़ता है

हर Clause और Table, और उनकी सत्यापन की विधि

Tables आख़िरी बार 1 Oct 2026 को जाँची गईं।

क्या यह उपयोगी था?

कोई सवाल, या कोई मान गलत लगता है? हमसे संपर्क करें।