स्विचबोर्ड फ़ॉर्म चेकर
स्विचबोर्ड के लिए सेपरेशन, एक्सेस और क्लीयरेंस जाँचें।
Reads AS/NZS 3000:2018. Tables checked 26 Sept 2026.
कोई प्रोजेक्ट आज़माएँ 5
हर जॉब में उदाहरण मान भरे होते हैं। उन्हें अपने मानों से बदलें।
- Check the access to a main switchboardThe access clearances and separation rules for an 800 A main switchboard.
- Check access to a house switchboardThe clear space a domestic switchboard needs.
- Check a long board for two exitsWhether a 3.6 m board needs two exits.
- Check a board in a cupboardThe access for a 400 A board that is not in a room.
- Check the impulse clearancesThe clearance for a 6 kV impulse withstand.
इनपुट
डिफ़ॉल्ट इनपुट के साथ एक कार्य-उदाहरण।
- प्रति फ़ेज़ बोर्ड रेटिंग
- 400 A
- बोर्ड की लंबाई
- 2 m
- घरेलू इंस्टॉलेशन
- नहीं
- रेटेड इम्पल्स विदस्टैंड वोल्टेज Uimp
- 6 kV, इंस्टॉलेशन का उद्गम
- बोर्ड ऐसे कमरे में है जहाँ पहुँचने के लिए आपको अंदर जाना पड़ता है।
- हाँ
- बोर्ड के सामने खाली जगह रखें
- 0 m
यह बोर्ड पर Cl 2.5.5 लागू होता है
नहीं
- आने वाली आपूर्ति के कंडक्टर, Cl 2.5.5.1
- आवश्यक नहीं
- आंतरिक अलगाव, Cl 2.5.5.2 रास्ता
- आवश्यक नहीं
- उस रूट के लिए उपयुक्त फ़ॉर्म, App K उदाहरण
- 3b or 4a or 4b
- हर उस फ़ेस से क्लियरेंस जिस तक पहुँच चाहिए
- 1m
- बोर्ड के चारों ओर बिना बाधा की जगह
- 0.6m
- आपातकालीन निकास मार्ग
- निकलने के लिए पर्याप्त, कोई संख्या तय नहीं
- Uimp 6 kV पर क्लीयरेंस, परिशिष्ट K उदाहरण
- 5.5mm
यह परिणाम डिज़ाइन में सहायता के लिए है। इसे मौजूदा मानक से सत्यापित करें।
गणना के चरण
- इस बोर्ड पर Cl 2.5.5 लागू होता हैपरिणामनहीं
AS/NZS 3000:2018 Cl 2.5.5
- आने वाले सप्लाई कंडक्टरों को इन्सुलेट या अलग करें, Cl 2.5.5.1आवश्यक नहीं
AS/NZS 3000:2018 Cl 2.5.5
- आंतरिक पृथक्करण, Cl 2.5.5.2 का मार्गआवश्यक नहीं
AS/NZS 3000:2018 Cl 2.5.5
- पृथक्करण के स्वीकृत रूप, कोई एक उपयोग करें, App K example3b or 4a or 4b
AS/NZS 3000:2018 App K Para K6.2
- स्वीकृत फ़ॉर्म प्रत्यय, App K examplei, h, ih
AS/NZS 3000:2018 App K Para K6.2
- हर फ़ॉर्म क्या अलग करता है, App K exampleTable K2
AS/NZS 3000:2018 App K Table K2
- पहुँच की ज़रूरत वाले हर फलक से क्लीयरेंस1m
AS/NZS 3000:2018 Cl 2.10.2.2
- बोर्ड के चारों ओर बिना बाधा की जगह0.6m
AS/NZS 3000:2018 Cl 2.10.2.2
- आपातकालीन निकास मार्गनिकलने के लिए पर्याप्त, कोई संख्या तय नहीं
AS/NZS 3000:2018 Cl 2.10.2.2
- दरवाज़े की न्यूनतम साफ़ चौड़ाईइस बोर्ड के लिए कोई आंकड़ा नहीं
AS/NZS 3000:2018 Cl 2.10.2.2
- दरवाज़े की न्यूनतम साफ़ ऊँचाईइस बोर्ड के लिए कोई आंकड़ा नहीं
AS/NZS 3000:2018 Cl 2.10.2.2
- Uimp 6 kV, App K example पर ओवरवोल्टेज श्रेणीIV
AS/NZS 3000:2018 App K Para K6.4
- Uimp 6 kV पर क्लियरेंस, App K example5.5mm
AS/NZS 3000:2018 App K Para K6.4
- Uimp 6 kV पर वैकल्पिक टेस्ट वोल्टेज, kV r.m.s., App K example5.1
AS/NZS 3000:2018 App K Para K6.4
- Ui 440 V पर क्रीपेज, प्रदूषण डिग्री 3, मटीरियल समूह III, App K example6.3mm
AS/NZS 3000:2018 App K Para K6.5
इस कैलकुलेटर के बारे में
How this is calculated
The tool checks whether Clause 2.5.5 of AS/NZS 3000:2018 asks for separation inside a switchboard. It also reads the access and exit figures of Clause 2.10.2.2 and the Appendix K examples.
- Scope. It compares the board rating with the Cl 2.5.5 threshold. At or above it, Cl 2.5.5 applies.
- Incoming conductors. Where Cl 2.5.5 applies, the incoming supply conductors are insulated or separated (Cl 2.5.5.1).
- Internal separation. The tool says if the Cl 2.5.5.2 route needs internal separation. It lists the forms that suit that route, from Paragraph K6.2 and Table K2.
- Access. From Cl 2.10.2.2 it gives the clearance from each face that needs access. It also gives the unimpeded space around the board. A domestic board has its own front clearance.
- Exits. A switchroom can pass the rating or length trigger. Then the tool gives the exit count and doorway size.
- Clearance example. It reads the Appendix K clearance for the impulse voltage you pick (Paragraphs K6.4 and K6.5).
| Step | Table or clause | What it decides |
|---|---|---|
| Scope and separation | AS/NZS 3000 Cl 2.5.5 | Whether the board needs separation |
| Forms | App K Para K6.2 and Table K2 | The forms that suit |
| Access and exits | Cl 2.10.2.2 | Clearances, exits and doorways |
| Clearances | App K Para K6.4 and K6.5 | The worked examples |
Worked example
A 1000 A commercial board in a switchroom. Cl 2.5.5 applies and internal separation is required. Forms 3b, 4a or 4b suit. The tool gives 2 exit paths, set well apart. The Appendix K clearance at 6 kV is 5.5 mm.
Limits
- Appendix K is informative. Its clearance and creepage figures are examples. Verify them to AS/NZS 61439.1.
- The tool holds the Cl 2.5.5.2 route only. Cl 2.5.5.1 offers other routes.
- Under the trigger, the tool gives no exit count and no doorway size.
- Measure each clearance with the doors and gear in the positions the clause names.
- Door swing and hold-open rules appear as warnings only.
See also: Industrial switchboards, Switchboard fault rating and busbar withstand and the fault rating calculator.
सवाल
परिणाम एक डिज़ाइन सहायता है। मौजूदा मानक से सत्यापित करें।
स्विचबोर्ड को इंटरनल सेपरेशन कब चाहिए?
AS/NZS 3000:2018 Clause 2.5.5 प्रति फ़ेज़ 800 A या उससे अधिक के स्विचबोर्ड को कवर करता है। रेटिंग दर्ज करें और AmpSize बताता है कि बोर्ड वह ट्रिगर पूरा करता है या नहीं। Clause 2.5.5.1 हर रूट पर आने वाले सप्लाई कंडक्टरों को इंसुलेट या सेपरेट करने के लिए भी कहता है। Clause 2.5.5.2 फिर बोर्ड के लिए ज़रूरी इंटरनल सेपरेशन तय करता है।
सेपरेशन के कौन से फ़ॉर्म स्वीकार्य हैं?
Appendix K के पैराग्राफ़ K6.2 में Form 3b, Form 4a और Form 4b का नाम है, और i, h और ih प्रत्यय वाले वही फ़ॉर्म भी। Table K2 दिखाता है कि हर फ़ॉर्म क्या अलग करता है। Appendix K सूचनात्मक है, इसलिए इन्हें मानक द्वारा तय आंकड़े के बजाय Clause 2.5.5.2 तक पहुँचने के एक उदाहरण मार्ग के रूप में लें।
स्विचबोर्ड के चारों ओर कितनी जगह चाहिए?
Clause 2.10.2.2.1 हर उस फ़ेस से 1.0 m तय करता है जिसे एक्सेस चाहिए। घरेलू इंस्टॉलेशन में बोर्ड के फ़ेस पर 0.6 m इस्तेमाल हो सकता है। AmpSize यह राहत सामने वाले फ़ेस पर लागू करता है। अन्य फ़ेस 1.0 m रखते हैं। यह Clause बोर्ड के चारों ओर 0.6 m की बिना बाधा वाली जगह तय करता है। जो दरवाज़े और स्विचगियर की स्थितियाँ यह मानता है, उनके लिए Clause पढ़ें।
कब दो इमरजेंसी एग्ज़िट पाथ चाहिए?
Clause 2.10.2.2.2 में दो एग्ज़िट पाथ तय हैं, काफ़ी दूरी पर, जहाँ बोर्ड तक पहुँचने के लिए आपको कमरे में जाना पड़े। यह 800 A प्रति फ़ेज़ या उससे अधिक, या 3 m से लंबे बोर्ड पर लागू होता है। यदि दरवाज़े खुले और गियर बाहर निकला होने पर सामने 3 m साफ़ रहता है, तो एक पाथ काफ़ी है। अन्य बोर्डों को पर्याप्त एग्ज़िट पाथ चाहिए, इनकी कोई तय संख्या नहीं है।
टूल कौन सा संस्करण पढ़ता है, और क्या छोड़ देता है?
टूल Amendments 1, 2 और 3 सहित AS/NZS 3000:2018 पढ़ता है। Amendment 2 ने Clause 2.10.2.2 दोबारा लिखा। Amendment 3 ने Clause 2.5.5 से सिर्फ़ AS/NZS 3439 के संदर्भ हटाए। टूल Clauses 2.5.5 और 2.10.2.2 और Appendix K के Paragraphs K6.2, K6.4 और K6.5 रखता है। रेटेड डायवर्सिटी फ़ैक्टर और तापमान वृद्धि की जाँचें AS/NZS 61439 श्रृंखला में हैं, इसलिए टूल दोनों में से कोई नहीं रखता।
हल किए गए उदाहरण
बैकग्राउंड
वे Clauses और Tables जो यह टूल पढ़ता है
- AS/NZS 3000:2018 App K Para K6.2Form of internal separation
- AS/NZS 3000:2018 App K Para K6.4Overvoltage category
- AS/NZS 3000:2018 App K Para K6.5Creepage
- AS/NZS 3000:2018 App K Table K2Internal separation, the least each form needs
- AS/NZS 3000:2018 Cl 2.5.5Protection against arcing faults inside a switchboard
- AS/NZS 3000:2018 Cl 2.10.2.2Switchboard access and emergency exits
- AS/NZS 3000:2018 Cl 2.5.5, Cl 2.10.2.2 and App K Table K2Switchboard internal separation, access and clearances
हर Clause और Table, और उनकी सत्यापन की विधि
Tables आख़िरी बार 26 Sept 2026 को जाँची गईं।
संबंधित टूल
- केबल फ़ॉल्ट रेटिंग कैलकुलेटरCheck that a conductor can withstand the fault current.AS/NZS 3008.1.2AS/NZS 3008.1.1AS/NZS 3000
- आर्क फ़्लैश कैलकुलेटरEstimate the energy of an arc flash and its PPE category.IEEE 1584-2018IEEE 1584-2002
- RCD चयन कैलकुलेटरCheck if an RCD is required and test the trip time.AS/NZS 3000Electricity (Safety) Regulations 2010
क्या यह उपयोगी था?
कोई सवाल, या कोई मान गलत लगता है? हमसे संपर्क करें।